Abstract Paeonia ostii is the representative of oil-utilized peony, its roots (PR) and leaves (PL) are discarded as by-products, resulting in a waste of resources. The exploration of extraction process of active ingredients from PR/PL is beneficial to the comprehensive utilization. In this work, the optimum process of Ultrasound-Assisted Extraction (UAEo) of total flavonoids content (TFC) from PR and PL was determined by single factor and response surface methodology. The results showed that UAEo was 80 min, 1:5 g/mL, 250 W, 33.83 mg Rutin/g dw for PR and 60 min, 1:10 g/mL, 250 W, 25.85 mg Rutin/g dw for PL. Then, Homogenization-Assisted Extraction (HAE), Homogenization-Ultrasound-Assisted Extraction (HUAEo) and Ultrasound-Homogenization-Assisted Extraction (UHAEo) were further analyzed. The highest PR(PL)-TFC by HUAEo at homogenization 5 min was 49.58 ± 0.25 mg/g with an increase of 46.6% (33.02 ± 0.04 mg/g with an increase of 27.7%). The highest PR/PL-total phenolic content by the HUAEo reached 77.84 ± 0.52 mg/g dw and 146.62 ± 2.77 mg/g dw for homogenization 3 min. However, there was no significant difference between HUAEo and UHAEo. In conclusion, the TFC increased with the extension of HAE time, and the combined extraction was higher yield than the single extraction.

Abstract Response surface methodology (RSM) was used to optimize the ultrasound-assisted extraction parameters of perilla protein isolate (PPI), which has functional properties. A central composite experimental design was applied to investigate the effects of three factors (ultrasonic power, extraction time, and liquid-to-solid ratio) on six responses: protein yield, water solubility index (WSI), water absorption capacity (WAC), oil holding capacity (OHC), emulsifying activity (EA), and foaming ability (FA). Based on the RSM results, the optimum conditions were an ultrasonic power of 206 W, and extraction time of 32.4 min, and a liquid-to-solid ratio of 10.34:1. Under these conditions, PPI had high protein yield (26.1%) and functional properties (55.2% WSI, 3.6% WAC, 1.76 g/g OHC, 60.25 m2/g EA, 63.2% FA). Differential scanning calorimetry revealed that PPI was slightly denatured at 75.16 °C, and the amount of heat required to induce this denaturation was 0.03 J/g. SDS-PAGE presented protein bands that ranged from 14.4 to 66.2 kDa. Based on its functional properties, PPI can be used in the food industry.

Abstract Response surface methodology (RSM) was used to optimize ultrasound-assisted aqueous enzymatic extraction (UAAEE) conditions for perilla seed oil. Under the optimum conditions—which were a liquid-to-solid ratio of 4.4:1, a hydrolysis time of 2.66 h, a hydrolysis temperature of 50.87 °C and an ultrasound treatment time of 24.74 min—an oil yield of 31.34% was obtained. Comparisons of the physicochemical characteristics of oil obtained using UAAEE with those of oil obtained by solvent extraction (SE oil) and cold pressing extraction (CPE oil) revealed similar refractive indices and saponification values, but UAAEE oil had a higher iodine value and better stability against oxidation, with a low peroxide value. UAAEE oil contained higher levels of beneficial α-linolenic acid and phenolics than SE oil or CPE oil, and it also had superior efficiency in scavenging 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals.